
Unified national service hotline
NEWS
CONTACT US

Tel:0769-85228059 85194860
Fax:0769-85245586
After-sales service line:0769-85529591
Mail:fu328@126.com
Add:No. 3, Xinlian Xinxing Road, Humen, Dongguan, Guangdong
Taiwan: No. 5, Jingke 7th Road, Nantun District, Taichung City
NEWS CENTER
Some solutions to the uneven cutting of metal circular saw
- Author:
- Origin:
- Time of issue:2018-08-07 17:35
- Pageviews:
(Summary description)Recently, a customer of ours reported to our after-sales colleague of Jincheng Machinery that the nozzles cut by the automatic metal circular sawing machine bought before were not flat, slightly deformed, and also had burrs. Ask us how to solve this problem?
Some solutions to the uneven cutting of metal circular saw
(Summary description)Recently, a customer of ours reported to our after-sales colleague of Jincheng Machinery that the nozzles cut by the automatic metal circular sawing machine bought before were not flat, slightly deformed, and also had burrs. Ask us how to solve this problem?
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2018-08-07 17:35
- Views:0
Recently, a customer of ours reported to our after-sales colleague of Jincheng Machinery that the nozzles cut by the automatic metal circular sawing machine bought before were not flat, slightly deformed, and also had burrs. Ask us how to solve this problem?
Now I will give you an analysis of the key to this problem. This is a process problem in our machinery industry. Customers must find the problem from the automatic metal circular sawing machine they use. Either just change the machine or perform secondary processing (polishing). Of course, there is a better way to replace a better metal circular saw.
If you are looking for the problem from your own existing automatic metal circular sawing machine, you may wish to check whether the clamps of the automatic circular sawing machine are not clamped tightly or clamped too tightly, because these two conditions may cause the pipe to be deformed. Or the problem of glitches. In addition, you need to check whether the saw blade is sharp, or buy a better saw blade to cut. If the above two situations are ruled out, it is very likely that the equipment itself is not powered enough or the cutting speed is not fast, and other mechanical problems have caused the nozzle to appear uneven or burrs. For this situation, only consider replacing a better pipe cutting machine. NS.
If you purchase additional polishing tools for secondary processing, you can solve problems such as burrs. However, this will cause the company's production process to increase, slow down the production speed, increase production costs, and lose more than the gains. If the requirements for the nozzle are not very high, it is recommended not to use this method as much as possible.
For more information, please log on to m.dgjcjx.com or Jincheng Machinery Company's website www.dgjcjx.com
Scan the QR code to read on your phone