img

Unified national service hotline

东莞市晋诚机械有限公司

News
News
新闻资讯

NEWS

CONTACT US

CONTACT US

Tel:0769-85228059 85194860
Fax:0769-85245586
After-sales service line:
0769-85529591
Mail:fu328@126.com

Add:No. 3, Xinlian Xinxing Road, Humen, Dongguan, Guangdong
Taiwan: No. 5, Jingke 7th Road, Nantun District, Taichung City

NEWS CENTER

Your current location:
Homepage
>
>
>
Safety precautions for solid bar cutting machine, iron bar blanking machine, steel bar high-speed cutting machine

Safety precautions for solid bar cutting machine, iron bar blanking machine, steel bar high-speed cutting machine

  • Author:
  • Origin:
  • Time of issue:2014-09-28 13:26
  • Pageviews:

(Summary description)The hydraulic system must be controlled by an advanced cartridge valve or slide valve system, and the solid rod cutting machine needs to be equipped with a high-stability hydraulic press with centralized buttons.

Safety precautions for solid bar cutting machine, iron bar blanking machine, steel bar high-speed cutting machine

(Summary description)The hydraulic system must be controlled by an advanced cartridge valve or slide valve system, and the solid rod cutting machine needs to be equipped with a high-stability hydraulic press with centralized buttons.

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2014-09-28 13:26
  • Views:0
Information

  How to safely operate solid bar cutting machine (iron bar blanking machine)

  (1). The main motor of the solid rod cutting machine needs to be equipped with a programmable controller,

  (2). The hydraulic system must be controlled by an advanced cartridge valve or slide valve system, and the solid rod cutting machine needs to be equipped with a high-stability hydraulic press with centralized buttons.

  (3). The pressure, speed and stroke of the sawing iron rod can be adjusted according to the process requirements. The solid rod cutting machine can adopt servo automatic feeding or manual feeding for sawing and cutting.

  Generally, in the sales and after-sales service links of solid rod cutting machines, manufacturers of solid rod cutting machines will inform the purchaser of the daily maintenance and operation specifications of the machine, but the following points should also be paid attention to in specific operations:

  Check that the oil in the oil storage tank of the circular saw should be sufficient. After starting the oil pump, check the valve and pipeline for leakage, the cutting pressure should meet the requirements, and open the air release valve to release the air in the system. Before the solid rod cutting machine is used for dry running test, it should be turned manually for a working stroke, and the equipment can only be started after confirming the normal operation of the machine.

  The solid rod cutting machine mainly adopts hydraulic brake, so the following basic operation items should be paid attention to in daily operation:

  1. There should be enough bar stacking space around the circular saw cutting machine.

  2. The rotating parts should have protective covers, and gloves and protective work clothes should be worn during manual operations.

  3. Check the saw blade for cracks, missing teeth, crooked teeth, etc., and whether the saw blade fixing screws are tight.

  4. It is not allowed to hold the two ends of the bar with both hands for sawing, and only hold the bar on the side by your hand.

  5. When working, hold the bar with both hands and align it with the edge of the saw blade. When the saw blade comes down and feel pressure, press the iron bar immediately to prevent the end of it from lifting and hurting people.

  6. It is forbidden to cut bars with a diameter exceeding the mechanical regulations and red-hot iron bars. When multiple pipe bars are cut at the same time, the cross section of the bar must be converted and the saw blade should be adjusted in time to prevent accidents.

  7. When cutting solid bars, replace with high-hardness saw blades.

  8. When cutting short materials, the length of the hand-held end shall not be less than 40cm, and the distance between the hand and the saw blade should be kept above 15cm.

  9. When cutting the longer rod, there should be a dedicated person to help the pipe rod, the helper and the operator have the same actions, and they should not drag it arbitrarily under the command.

  10. It is strictly forbidden to clean up the debris near the saw blade by hand during the operation of the machine, and it is forbidden to stay on site.

  11. When the saw blade is found to be cracked, skewed, or tooth-dropped, the power should be cut off for maintenance immediately.

  Keywords: solid rod cutting machine, iron rod cutting machine, steel rod cutting machine, circular saw machine, circular saw cutting machine

  Main business: pipe cutting machine, aluminum cutting machine, single and two-way chamfering machine, metal circular sawing machine, pipe bending machine, saw blade grinding machine, pipe end forming equipment, high-quality circular saw blade, etc., reasonable price, stable performance and safety High performance, fast sawing, chamfering and bending efficiency.

  Dongguan Jincheng Machinery Co., Ltd. ("Jincheng Machinery" for short) is an enterprise that integrates design, manufacturing, installation and sales, and specializes in manufacturing metal pipe processing equipment. It is the system of Taiwan Yiyan Precision Machinery Co., Ltd. It started from Taiwan's process design and independent research and development of new machinery, and its manufacturing technology and product quality are at the leading level in the industry. Specializing in metal circular sawing machine, aluminum cutting machine, saw blade grinding machine, pipe bending machine, double-head chamfering machine, pipe end forming machine and other pipes, profiles, processing equipment. Widely used in furniture, hardware, electronics, aviation, automobiles, motorcycles, bicycles, sports equipment, medical equipment, air conditioning, refrigeration, decoration and other industries.

  The company adheres to the business philosophy of "customer first, forge ahead" and the principle of "customer first" to provide our customers with quality services.

  Warmly welcome people of insight from all walks of life to visit, exchange and negotiate.

Scan the QR code to read on your phone

Copyright © 2021 Dongguan Jincheng Machinery Co., Ltd. 粤ICP备19100030号 Powered by 300.cn

点击这里给我发消息 Manager Lu

点击这里给我发消息 Manager Zhang

点击这里给我发消息 Manager Dai

点击这里给我发消息 Manager Wu

0769-85228059

online time:08:30-18:30

fu328@126.com

looking forward your message