The base of the ultra-high-speed metal circular saw is designed with multi-layer reinforcing ribs, and the main body is made of QT-500 ductile iron after tempering. And use innovative oil circuit design, fully imported hydraulic valve, vertical slide way to advance and retreat knife, solid feeding structure, precise action, floating material seat, without damaging the surface of the workpiece. So how to operate the ultra-high-speed metal circular sawing machine correctly and safely? Let's take a look at the safe operating procedures of the metal circular sawing machine.

　　1. The staff who operates the circular saw must read the operating instructions in detail, or be trained to perform stand-alone operation of the machine. The operator should be familiar with the general performance and structure of the machine, and be able to correctly deal with the failure of the equipment. Correct judgment and emergency measures.

　　2. Workers operating this machine must wear safety helmets, protective gloves, and work clothes to prevent injuries.

　　3. Check whether the saw blade is installed correctly and put on the safety protective cover, and check whether the saw blade is damaged, and the corners of the saw blade must not be damaged, so as to avoid chipping or breaking of the saw blade during material sawing, which will affect the performance of the equipment and use it. .

　　4. Before use, check the height of the oil level of the machine head and keep the oil at a position above 1/2 of the oil level

　　5. Put the material into the material rack, set the parameters that need to be sawed on the control screen, adjust the limit baffle according to the required length and fix it, and send the workpiece to the limit stop for trial cutting of the material.

　　6. After the work is over, cut off all power sources, sweep and clean all debris on the workbench and clamps, and keep the environment around the machine clean and tidy.